Replacing uPVC Window Handles
It is simple to change the handles on windows made of Upvc. It is essential to ensure that the replacement handle fits inside the spindle cutout in the window mechanism.
If you follow the steps below, any cockspur handle will fit most windows. The key is the step in the height of the handle.
What to Look For
Over time, uPVC handles on many windows in the UK may begin to show signs wear and tear. When this happens, the window handle may become loose or difficult to operate, making it necessary to replace it. This is a fairly easy task that can be completed by anyone who is comfortable with basic hand tools.
The first step is to ensure that the handle is securely attached to the window frame, and is in an open position. The next step is to find the screws or pins that secure the handle in place. They are usually on the inside of the handle and can be removed with a screwdriver, or pliers.
Once the handle has become loose and sagging, gently pull it back from its hinges. Then, you'll have to locate a new handle of the same style and size. This can be accomplished in an online store or in a DIY store. The process should take about five minutes and requires a screwdriver is all you need.
The most important thing to consider when replacing a uPVC window handle is the step height. This is the distance between the handle's base and where it sits in the frame of the window. This is usually an accepted measurement, however it is crucial to check the step height of your existing handle before ordering an entirely new one.
There are several sizes depending on the type of handle. Inline handles for uPVC windows generally feature lug centers of 31mm as well as handles with cockspur that have 43mm centres. Tilt and turn handles are often found on uPVC windows, and they come with a unique design that allows windows to be slid up to allow for ventilation, and then turned to fully open the window.
The most common breakage in uPVC handles is that they crack inside instead of breaking off from the base section. This could make it difficult to open. It is crucial to ensure that any replacement handle is fitted with the same spindle that was used in your original one.
Remove the old Handle
Incorrectly installed or damaged window handles could cause double-glazed windows to close or open incorrectly, and can result in them getting stuck. This could be due to various factors, including general wear and tear on the metal handle or corrosion. In these instances, it is important to find replacement window handles made of upvc as soon as you can to avoid further damage and loss of functionality.
One of the first steps to do when replacing the handles on your windows made of upvc is to remove the old handle from the window. To do this, start by removing the screw that is covered when the handle is in a closed position. This should reveal another screw that once removed, you are able to begin to remove the handle. It is a good idea to make use of an electric screwdriver for this since it will make the task much easier and quicker.
You should also be aware that screws can be hidden under caps made of plastic. It is recommended to remove the covers with a Stanley knife. After the handle has been removed, you should then examine the square cut out at the base of the handle to make sure that the new window lock handles will work with it. It is essential to measure the spindle length on the handle that was used and compare it to the dimensions of the window mechanism spindle cutout.
The different types of upvc window handles are: Espag handles, which feature a central screw that will turn left or right; Cranked handles that have two screws and are used on tilt and turn upvc windows as well as Spade handles, that have an arm that is flat and can be placed on either side of the window. It is simple to replace the handle after you have found one that is suitable. Just put it in place and make sure the spindle is properly inserted in the lock mechanism. Once you have done this then tighten the handle to the window frame. upvc door handles should now be secure.
Measure the Spindle
If you're replacing a Upvc window handle that has slipped off, it is likely due to the spindle that holds it in place has become damaged or loose. In certain situations, you can tighten the spindle by using a screw or pin. In some cases it is necessary to replace the handle. There are a variety of handles made from upvc. They include espagnolette handles that are inline as well as cockspur handles. tilt and turn handles. Each handle type has its own procedure for installing and removing the handle.
It is crucial to measure the current handle before purchasing an alternative. This will help ensure that the new handle is of the correct size and will fit correctly within the window. Fortunately, all handles follow industry standard sizing so it's fairly easy to find the correct size.
To determine the size of your handle first remove it from the window by turning it back to the open position. Then, you should be able see the size of the screw or pin that secures it. Then, use the ruler or tape measure to determine the length of the spindle. Once you know the length of the spindle you can purchase a replacement spindle that is the same length.
When you are looking to replace a handle window handle, it is crucial to take into consideration the step height of an upvc window handle. The step height is measured from the base to the point at which the handle is placed on the frame. It is typically about 21mm or 9mm for aluminum and uPVC. Dropping something in the space will allow you to observe how far the handle extends before it comes into contact with an obstruction.
Cockspur handles come with different backsets, based on the type of window you put them in. Inline Espag handles come with an average height of 43mm from centre to centre (2 fixing points). Cockspur handles have different backsets based on the window they are in. This is due to the fact that they have a spur which extends from their handle and is locked onto a cockspur wedge hitting plate.
Fit the New Handle
After you've chosen the new handle, ensure that it is aligned with the screw holes on the door. Then secure it using the screws provided. If you're replacing the latch lever it can be put in the same way as the main door handle. Then, you can attach the door trim once more to conceal the screws for mounting.
Tips: To remove a metal head from a wooden wedge, place the handle on the floor, so that its wide end is on the ground. Then, use to tap the thin end. Be careful not to scratch the handle or the spindle.